SmartAXIS Touch User's Manual 2-29
1 WindO/I-NV3 Specifications
2
WindO/I-NV3 Basic Operations
■ Select
Closes Picture Manager and sets the picture selected in the picture list.
■ Close
Closes Picture Manager.
Open Dialog Box Options
Specify advanced settings when saving image files.
■ Options <<
Toggles between showing and hiding the option items.
■ Apply Dithering
Selects this check box to perform dithering (error diffusion method) on images.
This function enables some images with tonal gradations and photo-like pictures to be rendered more beautifully
when they are saved.
■ Color Exchange
(Color before conversion) (Color after conversion)
(Option items)
Selects this check box to convert the color of the picture.
From: Specifies color before conversion. Click this button to display the Color Settings dialog box. Specify the color,
and then click OK.
to: Selects the color after conversion (color: 256 colors, monochrome: 8 shades). Click this button to display the
Color Palette. Select a color from the Color Palette. Transparent can also be selected.
If a color conversion to transparent is done when the monitor used for WindO/I-NV3 is a 16-bit color or
256-color display, even colors other than the color specified in (Color before conversion) may appear
transparent. However, on the Touch they will appear normally.
To Next Page
Loading...
