3 Configuration & Functions
2-40 SmartAXIS Touch User's Manual
2 Add or delete commands.
To add a command
1 Select the command to add in Choose commands from.
2 Click on the command to add from the list and then click Add>>.
The command is added.
To delete a command
Click the command to delete and then click Remove.
The command is deleted.
■ Show Below the Ribbon
You can change the position of the quick access toolbar to be located below the ribbon.
Click on the quick access toolbar and then click Show Below the Ribbon.
If you right click a command on the quick access toolbar and click Remove from Quick Access Toolbar,
that quick access toolbar command can be deleted.
• To change the order of the commands, click a command and then click ▲ or ▼ .
• To return to the quick access toolbar to its default settings, click Reset.
To Next Page
Loading...
