IDEC SmartAXIS Touch FT1A Series User Manual

1 Overview
13-8 SmartAXIS Touch User’s Manual
When Not Saving Data to the Data Storage Area
Select No Store under Data in the Auto-Setup dialog box or in the Individual Settings dialog box.
Use this option to monitor a device state and display only detected active alarms on the Alarm List Display.
●
Deleting Data
The method to delete sampled data from the data storage area is as follows.
•On the Online tab in WindO/I-NV3, click the arrow under Clear, and then click All or Alarm Log Data. For
details, refer to Chapter 23 “4 Clear” on page 23-22.
• On the Top Page in the System Mode, press Main Menu, Initial Setting, Initialize, and Alarm Log in order.
Alarm List Display
Tou ch
External device
Voltage drop
Pg.
Up
Pg.
Dwn
0
1
Alarm occurred

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English