SmartAXIS Touch User’s Manual 19-11
2 Text Groups and Text Configuration Procedure
19
Text Group
5 Double-click the dropped Bit Button and the properties dialog box is displayed.
6 Click the Registration Text tab.
7 Select the Use Text Manager check box.
8 Specify 1 for the Text ID under OFF.
9 Configure the settings on each tab as necessary, and then click OK.
The Properties of Bit Button dialog box closes.
10
Repeat steps 3 through 9 and create a Bit Button to use text ID 2 for the registration text.
This concludes configuring the settings to switch the displayed language by a value of device.
To Next Page
Loading...
Need help?
General
