IDEC SmartAXIS Touch FT1A Series User Manual

3 User Accounts Dialog Box
21-32 SmartAXIS Touch User’s Manual
New User Account Dialog Box and Change User Account Dialog Box
In the New User Account dialog box, the user name, password, and security groups are assigned to an account and
that user account is added.
In the Change User Account dialog box, the user name, password, and security groups for the selected user account
are changed.
General Tab
■ No.
In the New User Account dialog box, this setting specifies the number (1 to 15) when switching the account according
to the value of device.
When Edit was clicked and the Change User Account dialog box was displayed, this item displays the selected user
account number.
■ User Name
Enter the name for the user account.
The maximum number is eight characters. Only alphanumeric characters and symbols can be used.
■ Password
Enter the password.
The number of characters for the password is 4 to 15. Only uppercase alphabetic characters and numbers can be
used.
You cannot use the following characters in the user name.
\ / : * ? “ < > |
Write down the password so you do not forget it and save that note in a safe place.

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English