Korg NAUTILUS Series

PROGRAM mode: HD-1
10
Settings that are saved in a Combination
Timbre
The following timbres are used:
• Main Program: T01
• Layer or Split Program: T02
• Drum Track: T10
All of these Timbres (T01, 02, 10) are set to Play; the
remaining timbres are set to Mute.
Volume
For both Quick Layer and Split, the Volum e settings are
applied to the Timbre Volu me parameters.
Transpose
For both Quick Layer and Split, the Octave settings are
applied to the Timbre Transpose parameters.
Effect
All IFX, MFX, and TFX settings of the Main Program are
copied. IFX settings are packed forward when they are
copied.
For the Layer or Split Program, IFX settings are copied if
there are available free IFX; if not, the settings are not
copied. Send 1/2 values are copied.
Drum
The main or layer drums that you turned on will be set to
timbre 10.
The tempo value is copied from the selected Program.
MIDI Ch
When “Select ARP/DRUM” is set to “Main”, the channel
settings are “T01:16ch” and “T02:Gch”; and when “Select
ARP/DRUM” is set to “Layer”, the channel settings are
“T01:Gch” and “T02:16ch”.