EXi: MOD-7 Waveshaping VPM Synthesizer
330
01/W and Waveshaper Effect tables
The rest of the tables are based on those of the classic Korg
01/W and the Waveshaper effect.
Drive [-36dB…0dB…+36dB]
This sets the volume of the signal going into waveshaper. By
reducing the Drive, you can make the signal interact with
only part of the table. This is particularly useful in
combination with Offset, as shown in the diagram below.
Drive can also be modulated to create changes in timbre, as
described under “Tip: Modulating Drive,” below.
With a pure sine oscillator, anything greater than 0dB will
clip. Often, clipping will sound bad—but some tables, such
as tanh, step, tube and diode, are specifically made for
clipping. With these tables, the harder you drive, the more
saturation/overdrive you’ll get.
Drive and Offset
Fuzzy Fuzzy Tube Get Fuzzy
Sine + Saw 2 Cycle Frequency3 Frequency7
10 Cycle
Double Sine PhaseCocoon
20 Cycle Attack Up
Symmetry Frequency8
GeoGraphic
Resonant1 Resonant2 Zinger
Reptile
StarSyncSter Prole
Take1 ZigzagForestVital Signs
High Pass
WS Bass Soft Curve
Line Sine1
Take2 Take3
Log Sine1
Smoothy
Real Steep
Experiment
Take5
ake4
Pulse5 Inverter1BowwBass
Pulse Octave
Integers
Super Square
Line Sine2 Comb
Snake
Rezzo Accordion
Super Resonant
riangles Inverter2
7th Resonant
Waves
Claver
ake6
Exciter
Booster
WurlyRubber ParabolaSoft Road
Table = Vital Signs
Drive = –06dB
Offset = 00
Gray = active part of table
Table = Vital Signs
Drive = –06dB
Offset = –50
To Next Page
Loading...
Need help?
General
