Korg NAUTILUS Series Parameter Guide

EXi: EP-1 MDS Electric Piano
368
Intensity [–10.0…+10.0]
This controls the depth and direction of the Intensity AMS
modulation.
5–1h: Amp & Cabinet
ON/OFF [On, Off]
This enables the amp and cabinet modeling.
AMS [List of AMS Sources]
This selects an AMS source to turn the amp and cabinet
model on or off. For a list of AMS sources, see “Alternate
Modulation Source (AMS) List” on page 901.
AMS Mode [Toggle, Momentary]
This controls the way in which the amp and cabinet Enable
AMS works. For more information, please see “AMS Mode”
on page 367.
DRIVE [00.0…10.0]
This controls the amount of overdrive and distortion in the
amp. At lower settings, the amp is very clean; as you
increase the DRIVE, it gets dirtier and more distorted. The
output level is compensated, so increasing DRIVE causes
only a moderate increase in perceived volume.
AMS [List of AMS Sources]
This selects an AMS source to control the DRIVE. For a list
of AMS sources, see “Alternate Modulation Source (AMS)
List” on page 901.
Intensity [–10.0…+10.0]
This controls the depth and direction of the DRIVE AMS
modulation.

Korg NAUTILUS Series Specifications

General

Sampling	Open Sampling System
MIDI	In, Out, Thru
Preset Combinations	384
Keyboard	61-key (NAUTILUS 61), 73-key (NAUTILUS 73), 88-key (NAUTILUS 88, RH3 weighted action)
Effects	12 Insert Effects; 2 Master Effects; 2 Total Effects
Sequencer	16-track MIDI Sequencer
Storage	Internal SSD (60 GB)
Audio Inputs	2 x 1/4"
Audio Outputs	Headphones
USB	Type A (host), Type B (device)
Weight	NAUTILUS 88: 23.1 kg
Display	8 inch TouchView™ GUI (800x600 pixels)