Korg NAUTILUS Series

854
Source [Off…Tempo]
Selects the modulation source of feedback amount.
Amount [+/–100]
Sets the feedback amount.
High Damp [%] [0…100]
Sets the amount of high-frequency attenuation.
Sync Source [Off…Tempo]
Selects the modulation source that will reset the point at
which the sound is captured for reverse playback. For more
information, see “Reverse Time and Sync Source” on
page 841.
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
“OUTPUT” on page 762.