GUI Reference
R&S
®
ZNB/ZNBT
665User Manual 1173.9163.02 ─ 55
Calibrate Newly Created Channels
If you select "Calibrate Newly Created Channels", then on closing the "DUT Centric
Wizard", the FW will create the channels and proceed with suitable calibrations.
Guided Amplifier Setup
Define DUT
The "Define DUT" step allows you to specify basic properties of an amplifier or load
them from the DUT Manager.
Similar to the Amplifier Configuration Dialog of the DUT Manager.
Applic Softtool
To Next Page
Loading...
