GUI Reference
R&S
®
ZNB/ZNBT
733User Manual 1173.9163.02 ─ 55
Remote command:
SYSTem:COMMunicate:RDEVice:SMATrix<Matr>:DEFine
SYSTem:COMMunicate:RDEVice:SMATrix<Matr>:SERial?
Delete All
Unregisters all switch matrices, automatically deleting all switch matrix RF connections.
Remote command:
SYSTem:COMMunicate:RDEVice:SMATrix:DELete
6.17.5.4 Device LAN Configuration Dialog
The "Device LAN Configuration" dialog allows to read and modify the "IP Configura-
tion" of an external device that is equipped with a LAN interface.
Access: External Matrices Dialog > "Configure"
Because the IP configuration is actually written to the device, the device must be
online for the settings to be applied.
Uncheck "Manual Configuration" if the device shall discover its host configuration via
DHCP. In this case only the device's "Hostname" can be specified.
In "Manual Configuration" mode also the unit's "IP Address", "Subnet Mask" and "Stan-
dard Gateway" can be set. If the unit is located in the same subnet as the analyzer,
Setup Softtool
To Next Page
Loading...
