R&S ZNB User Manual

Command Reference
R&S
®
ZNB/ZNBT
1051User Manual 1173.9163.02 ─ 55
8.3.7 HCOPy Commands
The HCOPy... commands control the output of screen information to an external
device. Part of the functionality of this system is included in the "File" menu.
HCOPy[:IMMediate]..................................................................................................... 1051
HCOPy:DESTination.................................................................................................... 1051
HCOPy:DEVice:LANGuage...........................................................................................1052
HCOPy:ITEM:ALL........................................................................................................1052
HCOPy:ITEM:LOGO[:STATe]........................................................................................ 1052
HCOPy:ITEM:MLISt[:STATe]......................................................................................... 1053
HCOPy:ITEM:TIME[:STATe].......................................................................................... 1053
HCOPy:PAGE:COLor................................................................................................... 1053
HCOPy:PAGE:MARGin:BOTTom...................................................................................1054
HCOPy:PAGE:MARGin:LEFT........................................................................................1054
HCOPy:PAGE:MARGin:RIGHt.......................................................................................1055
HCOPy:PAGE:MARGin:TOP.........................................................................................1055
HCOPy:PAGE:ORIentation........................................................................................... 1055
HCOPy:PAGE:WINDow................................................................................................1055
HCOPy[:IMMediate]
Initializes the print according to the current HCOPy... configuration.
Example:
HCOP:DEST '<Printer_name>'
Select the printer for the output of screen data.
HCOP
Start printing.
Usage: Event
Manual operation: See "Print" on page 625
HCOPy:DESTination <PrinterName>
Selects a printer name or file as destination for the screen output.
Parameters:
<PrinterName> String variable containing the printer name. One of the printers
accessible from your PC. The following strings are supported in
addition:
'MMEM' - print to file. The file name is defined via
MMEMory:NAME. The command HCOPy:DEVice:LANGuage
selects the file format.
'DEFPRT' - use default printer, to be selected in the "Devices
and Printers" dialog of the Windows control panel.
(Windows 7: "Printers and Faxes".)
*RST: n/a (*RST does not overwrite the printer destina-
tion)
SCPI Command Reference

R&S ZNB Specifications

General

Brand	R&S
Model	ZNB
Category	Measuring Instruments
Language	English