GUI Reference
R&S
®
ZNB/ZNBT
711User Manual 1173.9163.02 ─ 55
Create R&S Support Information
Saves the current selftest results to a zipped report file you can send to R&S Support
for fault diagnosis; see Chapter 10.3, "Collecting Information for Technical Support",
on page 1421.
Remote command:
DIAGnostic:DEVice:STATe
SYSTem:DFPRint?
Setup Tab
Displays the channel and trace settings of the active recall set and the main character-
istics of the instrument, including its IP address.
Setup Softtool
To Next Page
Loading...
