EasyManua.ls Logo

Broadcom NetXtreme/NetLink BCM5718 Series

Broadcom NetXtreme/NetLink BCM5718 Series
593 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Statistics RegistersBCM5718 Programmer’s Guide
Broadcom®
January 29, 2016 5718-PG108-R Page 342
ifHCInUcastPkts (offset: 0x88C)
The number of packets delivered by this sublayer to a higher sublayer, which were not addressed to a multicast
or broadcast address at this sublayer.
ifHCInMulticastPkts (offset: 0x890)
The number of packets delivered by this sublayer to a higher sublayer, which were addressed to a multicast
address at this sublayer.
ifHCInBroadcastPkts (offset: 0x894)
The number of packets delivered by this sublayer to a higher sublayer, which were addressed to a broadcast
address at this sublayer.
dot3StatsFCSErrors (offset: 0x898)
A count of frames received on a particular interface that are an integral number of octets in length and do not
pass the FCS check.
dot3StatsAlignmentErrors (offset: 0x89C)
A count of frames received on a particular interface that are not an integral number of octets in length and do
not pass the FCS check.
xonPauseFrameReceived (offset: 0x8A0)
MAC control frames with pause command and length equal to zero.
xoffPauseFrameReceived (offset: 0x8A4)
MAC control frames with pause command and length greater than zero.
macControlFramesRecevied (offset: 0x8A8)
MAC control frames with no pause command.
xoffStateEntered (offset: 0x8AC)
Transmitting is disabled.
dot3StatsFramesTooLongs (offset: 0x8B0)
A count of frames received on a particular interface that exceeds the maximum permitted frame size.

Table of Contents

Related product manuals