Revision HistoryBCM5718 Programmer’s Guide
Broadcom®
January 29, 2016 • 5718-PG108-R Page 9
5718-PG102-R 12/16/10 Updated:
• Added BCM5719 to “Introduction” on page 39.
• Added BCM5719 to “Related Documents” on page 39.
• Added BCM5719 to Table 1: “BCM5718 Family Product Features,” on
page 40.
• Removed PHY core column and added BCM5717 B0, BCM5718 BO,
and BCM5719 to Table 2: “Family Revision Levels,” on page 42.
• Updated note in “Revision Levels” on page 42.
• Added Memory Arbiter to Figure 1: “Individual Port Functional Block
Diagram,” on page 45.
• Added BCM5719 to “Overview of Features” on page 46.
• Added note about BCM5719 to Figure 2: “High-Level System Functional
Block Diagram,” on page 47.
• Added max ring sizes to “Ring Control Block” on page 99.
• Added BCM5719 toTable 6: “Defined Flags for Send Buffer Descriptors,”
on page 67.
• Updated Host Ring Size to Table 7: “Receive Return Rings,” on page 70.
• Corrected typo in Figure 26: “Send Driver Interface,” on page 119.
• Corrected typo in Figure 27: “Receive Producer Interface,” on page 120.
• Corrected typo in Figure 28: “Receive Return Interface,” on page 121.
• Updated Step 36 in “Initialization Procedure” on page 137.
• Added BCM5719 to “Description” on page 168.
• Corrected typo in “PCI Classcode and Revision ID Register (offset:
0x08)—Function 0” on page 255
• Corrected typos in “Power Management Control/Status Register (offset:
0x4C) — Function 0” on page 261
• Added note to Enable Endian Byte Swap in “Miscellaneous Host Control
Register (offset: 0x68)” on page 264.
• Updated all Indirection Table register descriptions in “RSS Registers” on
page 276.
• Added BCM5717 and BCM5718 values to “CPMU Control Register
(offset: 0x3600)” on page 346.
• Added BCM5719 to “Link Aware Power Mode Clock Policy Register
(offset: 0x3610)” on page 349.
• Added BCM5719 to “APE CLK Policy Register (offset: 0x361C)” on
page 352.
Revision Date Change Description
To Next Page
Loading...
Need help?
General
