Dell Force10 MXL Blade - Page 184

184 | Data Center Bridging
www.dell.com | support.dell.com
Parameters
Command Mode
CONFIGURATION
Command
History
Example
Figure 9-9. show stack-unit stack-ports ets detail Command Example
stack-unit
Enter the stack unit identification.
port-number
Enter the port number.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS(conf)# show stack-unit all stack-ports all ets details
Stack unit 0 stack port all
Max Supported TC Groups is 4
Number of Traffic Classes is 1
Admin mode is on
Admin Parameters:
--------------------
Admin is enabled
TC-grp Priority# Bandwidth TSA
------------------------------------------------
0 0,1,2,3,4,5,6,7 100% ETS
1 - -
2 - -
3 - -
4 - -
5 - -
6 - -
7 - -
8 - -
Stack unit 1 stack port all
Max Supported TC Groups is 4
Number of Traffic Classes is 1
Admin mode is on
Admin Parameters:
--------------------
Admin is enabled
TC-grp Priority# Bandwidth TSA
------------------------------------------------
0 0,1,2,3,4,5,6,7 100% ETS
1 - -
2 - -
3 - -
4 - -
5 - -
6 - -
7 - -
8 - -