C
HAPTER
34
| Spanning Tree Commands
– 1091 –
◆ Use the show spanning-tree mst command to display the spanning
tree configuration for all instances within the Multiple Spanning Tree
(MST), including global settings and settings for active interfaces.
◆ Use the show spanning-tree mst instance-id command to display the
spanning tree configuration for an instance within the Multiple
Spanning Tree (MST), including global settings and settings for all
interfaces.
◆ For a description of the items displayed under “Spanning-tree
information,” see "Configuring Global Settings for STA" on page 242.
For a description of the items displayed for specific interfaces, see
"Displaying Interface Settings for STA" on page 252.
EXAMPLE
Console#show spanning-tree
Spanning Tree Information
---------------------------------------------------------------
Spanning Tree Mode : MSTP
Spanning Tree Enabled/Disabled : Enabled
Instance : 0
VLANs Configured : 1-4094
Priority : 32768
Bridge Hello Time (sec.) : 2
Bridge Max. Age (sec.) : 20
Bridge Forward Delay (sec.) : 15
Root Hello Time (sec.) : 2
Root Max. Age (sec.) : 20
Root Forward Delay (sec.) : 15
Max. Hops : 20
Remaining Hops : 20
Designated Root : 32768.0.0001ECF8D8C6
Current Root Port : 21
Current Root Cost : 100000
Number of Topology Changes : 5
Last Topology Change Time (sec.): 11409
Transmission Limit : 3
Path Cost Method : Long
Flooding Behavior : To VLAN
Cisco Prestandard : Disabled
---------------------------------------------------------------
Eth 1/ 1 information
---------------------------------------------------------------
Admin Status : Enabled
Role : Disabled
State : Discarding
External Admin Path Cost : 0
Internal Admin Path Cost : 0
External Oper Path Cost : 100000
Internal Oper Path Cost : 100000
Priority : 128
Designated Cost : 100000
Designated Port : 128.1
Designated Root : 32768.0.0001ECF8D8C6
Designated Bridge : 32768.0.123412341234
Forward Transitions : 4
Admin Edge Port : Disabled
Oper Edge Port : Disabled
Admin Link Type : Auto
Oper Link Type : Point-to-point
Flooding Behavior : Enabled