Edge-Core ES3528MV2 - Snmp-Server Contact; Snmp-Server Location

C HAPTER 21 | SNMP Commands
General SNMP Commands
– 776 –
DEFAULT SETTING
◆ public - Read-only access. Authorized management stations are only
able to retrieve MIB objects.
◆ private - Read/write access. Authorized management stations are able
to both retrieve and modify MIB objects.
COMMAND MODE
Global Configuration
EXAMPLE
Console(config)#snmp-server community alpha rw
Console(config)#
snmp-server
contact
This command sets the system contact string. Use the no form to remove
the system contact information.
SYNTAX
snmp-server contact string
no snmp-server contact
string - String that describes the system contact information.
(Maximum length: 255 characters)
DEFAULT SETTING
None
COMMAND MODE
Global Configuration
EXAMPLE
Console(config)#snmp-server contact Paul
Console(config)#
RELATED COMMANDS
snmp-server location (776)
snmp-server
location
This command sets the system location string. Use the no form to remove
the location string.
SYNTAX
snmp-server location text
no snmp-server location
text - String that describes the system location.
(Maximum length: 255 characters)