C
HAPTER
13
| Security Measures
AAA Authorization and Accounting
– 321 –
To display basic accounting information and statistics recorded for user
sessions:
1. Click Security, AAA, Accounting.
2. Select Show Information from the Step list.
3. Click Statistics.
Figure 166: Displaying Statistics for AAA Accounting Sessions
CONFIGURING AAA
AUTHORIZATION
Use the Security > AAA > Authorization page to enable authorization of
requested services, and also to display the configured authorization
methods, and the methods applied to specific interfaces.
CLI REFERENCES
◆ "AAA" on page 824
COMMAND USAGE
◆ This feature performs authorization to determine if a user is allowed to
run an Exec shell.
◆ AAA authentication through a RADIUS or TACACS+ server must be
enabled before authorization is enabled.
PARAMETERS
These parameters are displayed:
Configure Method
◆ Authorization Type – Specifies the service as Exec, indicating
administrative authorization for local console, Telnet, or SSH
connections.
◆ Method Name – Specifies an authorization method for service
requests. The “default” method is used for a requested service if no
other methods have been defined. (Range: 1-64 characters)
◆ Server Group Name - Specifies the authorization server group.
(Range: 1-64 characters)
The group name “tacacs+” specifies all configured TACACS+ hosts (see
"Configuring Local/Remote Logon Authentication" on page 309). Any
To Next Page
Loading...
Need help?
General
