C
HAPTER
39
| Multicast Filtering Commands
MVR for IPv4
– 1275 –
show mvr statistics This command shows MVR protocol-related statistics for the specified
interface.
SYNTAX
show mvr statistics {input | output} [interface interface]
show mvr domain domain-id statistics
{input [interface interface] | output [interface interface] |
query}
domain-id - An independent multicast domain. (Range: 1-5)
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-12)
vlan vlan-id - VLAN ID (Range: 1-4094)
query - Displays MVR query-related statistics.
DEFAULT SETTING
Displays statistics for all domains.
COMMAND MODE
Privileged Exec
EXAMPLE
The following shows MVR protocol-related statistics received:
Console#show mvr domain 1 statistics input
MVR Domain : 1
Input Statistics:
Interface Report Leave G Query G(-S)-S Query Drop Join Succ Group
--------- -------- -------- -------- ------------- -------- --------- ------
Eth 1/ 1 23 11 4 10 5 20 9
Eth 1/ 2 12 15 8 3 5 19 4
VLAN 1 2 0 0 2 2 20 9
Console#
Table 166: show mvr statistics input - display description
Field Description
Interface Shows interfaces attached to the MVR.
Report The number of IGMP membership reports received on this
interface.
Leave The number of leave messages received on this interface.
G Query The number of general query messages received on this interface.
G(-S)-S Query The number of group specific or group-and-source specific query
messages received on this interface.
To Next Page
Loading...
Need help?
General
