C
HAPTER
13
| Security Measures
ARP Inspection
– 379 –
WEB INTERFACE
To display statistics for ARP Inspection:
1. Click Security, ARP Inspection.
2. Select Show Information from the Step list.
3. Select Show Statistics from the Action list.
Figure 208: Displaying Statistics for ARP Inspection
DISPLAYING THE
ARP INSPECTION LOG
Use the Security > ARP Inspection (Show Information - Show Log) page to
show information about entries stored in the log, including the associated
VLAN, port, and address components.
CLI REFERENCES
â—† "show ip arp inspection log" on page 939
PARAMETERS
These parameters are displayed:
Table 22: ARP Inspection Log
Parameter Description
VLAN ID The VLAN where this packet was seen.
Port The port where this packet was seen.
Src. IP Address The source IP address in the packet.
Dst. IP Address The destination IP address in the packet.
Src. MAC Address The source MAC address in the packet.
Dst. MAC Address The destination MAC address in the packet.
To Next Page
Loading...
Need help?
General
