C
HAPTER
20
| System Management Commands
Banner Information
– 702 –
Row: 7
Rack: 29
Shelf in this rack: 8
Information about DC power supply.
Floor: 2
Row: 7
Rack: 25
Electrical circuit: : ec-177743209-xb
Number of LP:12
Position of the equipment in the MUX:1/23
IP LAN:192.168.1.1
Note: This is a random note about this managed switch and can contain
miscellaneous information.
Console(config)#
banner configure
company
This command is used to configure company information displayed in the
banner. Use the no form to remove the company name from the banner
display.
SYNTAX
banner configure company name
no banner configure company
name - The name of the company.
(Maximum length: 32 characters)
DEFAULT SETTING
None
COMMAND MODE
Global Configuration
COMMAND USAGE
Input strings cannot contain spaces. The banner configure company
command interprets spaces as data input boundaries. The use of
underscores ( _ ) or other unobtrusive non-letter characters is suggested
for situations where white space is necessary for clarity.
EXAMPLE
Console(config)#banner configure company Big-Ben
Console(config)#
To Next Page
Loading...
Need help?
General
