C
HAPTER
41
| CFM Commands
Defining CFM Structures
– 1334 –
show ethernet cfm
ma
This command displays the configured maintenance associations.
SYNTAX
show ethernet cfm ma [level level]
level – Maintenance level. (Range: 0-7)
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
COMMAND USAGE
For a description of the values displayed in the CC Interval field, refer to
the ethernet cfm cc ma interval command.
EXAMPLE
This example shows all configured maintenance associations.
Console#show ethernet cfm ma
MD Name MA Index MA Name Primary VID CC Interval MIP Creation
--------------- -------- --------------- ----------- ----------- ------------
steve 1 voip 1 4 Default
Console#
show ethernet cfm
maintenance-points
local
This command displays the maintenance points configured on this device.
SYNTAX
show ethernet cfm maintenance-points local
{mep [domain domain-name | interface interface |
level level-id] | mip [domain domain-name | level level-id]}
mep – Displays only local maintenance end points.
mip – Displays only local maintenance intermediate points.
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
interface – Displays CFM status for the specified interface.
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-12)
level-id – Maintenance level for this domain. (Range: 0-7)
To Next Page
Loading...
Need help?
General
