C
HAPTER
39
| Multicast Filtering Commands
MVR for IPv6
– 1290 –
show mvr6
associated-profile
This command shows the profiles bound the specified domain.
SYNTAX
show mvr6 [domain domain-id] associated-profile
domain-id - An independent multicast domain. (Range: 1-5)
DEFAULT SETTING
Displays profiles bound to all MVR domains.
COMMAND MODE
Privileged Exec
EXAMPLE
The following displays the profiles bound to domain 1:
Console#show mvr6 domain 1 associated-profile
Domain ID : 1
MVR Profile Name Start IPv6 Addr. End IPv6 Addr.
-------------------- ------------------------- -------------------------
rd FF00::1 FF00::9
Console#
show mvr6 interface This command shows MVR configuration settings for interfaces attached to
the MVR VLAN.
SYNTAX
show mvr6 [domain domain-id] interface
domain-id - An independent multicast domain. (Range: 1-5)
DEFAULT SETTING
Displays configuration settings for all attached interfaces.
COMMAND MODE
Privileged Exec
MVR6 Multicast VLAN Shows the VLAN used to transport all MVR multicast traffic.
MVR6 Upstream
Source IP
The source IP address assigned to all upstream control packets.
Table 170: show mvr6 - display description (Continued)
Field Description
To Next Page
Loading...
Need help?
General
