C
HAPTER
13
| Security Measures
Configuring the Secure Shell
– 347 –
Figure 184: Generating the SSH Host Key Pair
To display or clear the SSH host key pair:
1. Click Security, SSH.
2. Select Configure Host Key from the Step list.
3. Select Show from the Action list.
4. Select the host-key type to clear.
5. Click Clear.
Figure 185: Showing the SSH Host Key Pair
IMPORTING USER
PUBLIC KEYS
Use the Security > SSH (Configure User Key - Copy) page to upload a
user’s public key to the switch. This public key must be stored on the
switch for the user to be able to log in using the public key authentication
mechanism. If the user’s public key does not exist on the switch, SSH will
revert to the interactive password authentication mechanism to complete
authentication.
CLI REFERENCES
â—† "Secure Shell" on page 838
To Next Page
Loading...
Need help?
General
