C
HAPTER
24
| Authentication Commands
Authentication Sequence
– 813 –
EXAMPLE
This example sets the privilege level for the ping command to Privileged
Exec.
Console(config)#privilege exec level 15 ping
Console(config)#
show privilege This command shows the privilege level for the current user, or the
privilege level for commands modified by the privilege command.
SYNTAX
show privilege [command]
command - Displays the privilege level for all commands modified
by the privilege command.
COMMAND MODE
Privileged Exec
EXAMPLE
This example shows the privilege level for any command modified by the
privilege command.
Console#show privilege command
privilege line all level 0 accounting
privilege exec level 15 ping
Console(config)#
AUTHENTICATION SEQUENCE
Three authentication methods can be specified to authenticate users
logging into the system for management access. The commands in this
section can be used to define the authentication method and sequence.
Table 73: Authentication Sequence Commands
Command Function Mode
authentication enable Defines the authentication method and precedence for
command mode change
GC
authentication login Defines logon authentication method and precedence GC
To Next Page
Loading...
Need help?
General
