Edge-Core ES3528MV2 - Displaying Information for Dynamic Ipv6 Source Guard Bindings

C HAPTER 13 | Security Measures
IPv6 Source Guard
– 409 –
DISPLAYING
INFORMATION
FOR DYNAMIC IPV6
S
OURCE GUARD
BINDINGS
Use the Security > IPv6 Source Guard > Dynamic Binding page to display
the source-guard binding table for a selected interface.
CLI REFERENCES
◆ "show ipv6 source-guard binding" on page 931
PARAMETERS
These parameters are displayed:
Query by
◆ Port – A port on this switch.
◆ VLAN – ID of a configured VLAN (Range: 1-4094)
◆ MAC Address – A valid unicast MAC address.
◆ IPv6 Address – A valid global unicast IPv6 address.
Dynamic Binding List
◆ VLAN – VLAN to which this entry is bound.
◆ MAC Address – Physical address associated with the entry.
◆ Interface – Port to which this entry is bound.
◆ IPv6 Address – IPv6 address corresponding to the client.
WEB INTERFACE
To display the binding table for IPv6 Source Guard:
1. Click Security, IPv6 Source Guard, Dynamic Binding.
2. Mark the search criteria, and enter the required values.
3. Click Query
Figure 227: Showing the IPv6 Source Guard Binding Table