Edge-Core ES3528MV2 - Displaying MVR Statistics

C HAPTER 17 | Multicast Filtering
Multicast VLAN Registration for IPv4
– 655 –
WEB INTERFACE
To display the interfaces assigned to the MVR receiver groups:
1. Click Multicast, MVR.
2. Select Show Member from the Step list.
3. Select an MVR domain.
Figure 396: Displaying MVR Receiver Groups
DISPLAYING
MVR STATISTICS
Use the Multicast > MVR > Show Statistics pages to display MVR protocol-
related statistics for the specified interface.
CLI REFERENCES
◆ "show mvr statistics" on page 1275
PARAMETERS
These parameters are displayed:
◆ Domain ID – An independent multicast domain. (Range: 1-5)
◆ VLAN – VLAN identifier. (Range: 1-4094)
◆ Port – Port identifier. (Range: 1-28)
◆ Trunk – Trunk identifier. (Range: 1-12)
Query Statistics
◆ Querier IP Address – The IP address of the querier on this interface.
◆ Querier Expire Time – The time after which this querier is assumed to
have expired.
◆ General Query Received – The number of general queries received
on this interface.