C
HAPTER
45
| IP Interface Commands
IPv6 Interface
– 1421 –
clear ipv6 traffic This command resets IPv6 traffic counters.
COMMAND MODE
Privileged Exec
COMMAND USAGE
This command resets all of the counters displayed by the show ipv6 traffic
command.
EXAMPLE
Console#clear ipv6 traffic
Console#
router advertisement
messages
The number of ICMP Router Advertisement messages sent by the
interface.
neighbor solicit messages The number of ICMP Neighbor Solicit messages sent by the
interface.
neighbor advertisement
messages
The number of ICMP Router Advertisement messages sent by the
interface.
redirect messages The number of Redirect messages sent. For a host, this object will
always be zero, since hosts do not send redirects.
group membership query
messages
The number of ICMPv6 Group Membership Query messages sent
by the interface.
group membership
response messages
The number of ICMPv6 Group Membership Response messages
sent.
group membership
reduction messages
The number of ICMPv6 Group Membership Reduction messages
sent.
multicast listener
discovery version 2
reports
The number of MLDv2 reports sent by the interface.
UDP Statistics
input The total number of UDP datagrams delivered to UDP users.
no port errors The total number of received UDP datagrams for which there was
no application at the destination port.
other errors The number of received UDP datagrams that could not be
delivered for reasons other than the lack of an application at the
destination port.
output The total number of UDP datagrams sent from this entity.
Table 200: show ipv6 traffic - display description (Continued)
Field Description
To Next Page
Loading...
Need help?
General
