C
HAPTER
14
| Basic Administration Protocols
Simple Network Management Protocol
– 462 –
â–
AuthPriv – SNMP communications use both authentication and
encryption.
◆ Authentication Protocol – The method used for user authentication.
(Options: MD5, SHA; Default: MD5)
◆ Authentication Password – A minimum of eight plain text characters
is required.
◆ Privacy Protocol – The encryption algorithm use for data privacy;
only 56-bit DES is currently available.
◆ Privacy Password – A minimum of eight plain text characters is
required.
WEB INTERFACE
To configure a local SNMPv3 user:
1. Click Administration, SNMP.
2. Select Configure User from the Step list.
3. Select Add SNMPv3 Local User from the Action list.
4. Enter a name and assign it to a group. If the security model is set to
SNMPv3 and the security level is authNoPriv or authPriv, then an
authentication protocol and password must be specified. If the security
level is authPriv, a privacy password must also be specified.
5. Click Apply
Figure 259: Configuring Local SNMPv3 Users
To Next Page
Loading...
Need help?
General
