C
HAPTER
39
| Multicast Filtering Commands
MVR for IPv6
– 1292 –
H - Host counts (number of hosts join the group on this port).
P - Port counts (number of ports join the group).
Up time: Group elapsed time (d:h:m:s).
Expire : Group remaining time (m:s).
Group Address VLAN Port Up time Expire Count
------------------------------ ---- ----------- ----------- ------ --------
FF00::1 1 2(P)
1 Eth1/ 1(S)
2 Eth1/ 2(S)
Console#
The following example shows detailed information about a specific
multicast address:
Console#show mvr6 domain 1 members ff00::1
MVR6 Domain : 1
MVR6 Forwarding Entry Count :1
Flag: S - Source port, R - Receiver port.
H - Host counts (number of hosts join the group on this port).
P - Port counts (number of ports join the group).
Up time: Group elapsed time (d:h:m:s).
Expire : Group remaining time (m:s).
Group Address VLAN Port Up time Expire Count
------------------------------ ---- ----------- ----------- ------ --------
FF00::1 1 2(P)
1 Eth1/ 1(S)
2 Eth1/ 2(S)
Console#
show mvr6 profile This command shows all configured MVR profiles.
COMMAND MODE
Privileged Exec
Table 172: show mvr6 members - display description
Field Description
Group Address Multicast group address.
VLAN VLAN to which this address is forwarded.
Port Port to which this address is forwarded.
Up time Time that this multicast group has been known.
Expire The time until this entry expires.
Count The number of times this address has been learned by MVR (MLD
snooping).
To Next Page
Loading...
Need help?
General
