Edge-Core ES3528MV2 - Show Ip Access-Group

C HAPTER 26 | Access Control Lists
IPv4 ACLs
– 957 –
COMMAND MODE
Interface Configuration (Ethernet)
COMMAND USAGE
If an ACL is already bound to a port and you bind a different ACL to it, the
switch will replace the old binding with the new one.
EXAMPLE
Console(config)#int eth 1/2
Console(config-if)#ip access-group david in
Console(config-if)#
RELATED COMMANDS
show ip access-list (957)
Time Range (762)
show ip
access-group
This command shows the ports assigned to IP ACLs.
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show ip access-group
Interface ethernet 1/2
IP access-list david in
Console#
RELATED COMMANDS
ip access-group (956)
show ip access-list This command displays the rules for configured IPv4 ACLs.
SYNTAX
show ip access-list {standard | extended} [acl-name]
standard – Specifies a standard IP ACL.
extended – Specifies an extended IP ACL.
acl-name – Name of the ACL. (Maximum length: 16 characters)
COMMAND MODE
Privileged Exec