Edge-Core ES3528MV2 User Manual

C HAPTER 42 | OAM Commands
– 1364 –
efm oam
link-monitor
frame threshold
This command sets the threshold for errored frame link events. Use the no
form to restore the default setting.
SYNTAX
efm oam link-monitor frame threshold count
no efm oam link-monitor frame threshold
count - The threshold for errored frame link events.
(Range: 1-65535)
DEFAULT SETTING
1
COMMAND MODE
Interface Configuration
COMMAND USAGE
If this feature is enabled, an event notification message is sent if the
threshold is reached or exceeded within the period specified by the efm
oam link-monitor frame window command (page 1364). The Errored
Frame Event TLV includes the number of errored frames detected during
the specified period.
EXAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#efm oam link-monitor frame threshold 5
Console(config-if)#
efm oam
link-monitor
frame window
This command sets the monitor period for errored frame link events. Use
the no form to restore the default setting.
SYNTAX
efm oam link-monitor frame window size
no efm oam link-monitor frame window
size - The period of time in which to check the reporting threshold
for errored frame link events. (Range: 10-65535 units of 10
milliseconds)
DEFAULT SETTING
10 (units of 100 milliseconds) = 1 second
COMMAND MODE
Interface Configuration
COMMAND USAGE
If this feature is enabled, an event notification message is sent if the
threshold specified by the efm oam link-monitor frame threshold command

Edge-Core ES3528MV2 Specifications

General

Brand	Edge-Core
Model	ES3528MV2
Category	Network Router
Language	English