C
HAPTER
41
| CFM Commands
Continuity Check Operations
– 1343 –
EXAMPLE
Console#clear ethernet cfm maintenance-points remote domain voip
Console#
clear ethernet cfm
errors
This command clears continuity check errors logged for the specified
maintenance domain or maintenance level.
SYNTAX
clear ethernet cfm errors [domain domain-name | level level-id]
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
level-id – Maintenance level. (Range: 0-7)
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
COMMAND USAGE
Use this command without any keywords to clear all entries in the error
database. Use the domain keyword to clear the error database for a
specific domain, or the level keyword to clear it for a specific maintenance
level.
EXAMPLE
Console#clear ethernet cfm errors domain voip
Console#
show ethernet cfm
errors
This command displays the CFM continuity check errors logged on this
device.
SYNTAX
show ethernet cfm errors [domain domain-name | level level-id]
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
level-id – Authorized maintenance level for this domain.
(Range: 0-7)
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
To Next Page
Loading...
Need help?
General
