C
HAPTER
17
| Multicast Filtering
Multicast VLAN Registration for IPv6
– 659 –
To display MVR protocol-related statistics for a port:
1. Click Multicast, MVR.
2. Select Show Statistics from the Step list.
3. Select Show Port Statistics from the Action list.
4. Select an MVR domain.
5. Select a Port.
Figure 399: Displaying MVR Statistics – Port
MULTICAST VLAN REGISTRATION FOR IPV6
MVR6 functions in a manner similar to that described for MRV (see
"Multicast VLAN Registration for IPv4" on page 642).
COMMAND USAGE
â—† General Configuration Guidelines for MVR6:
1. Enable MVR6 for a domain on the switch, and select the MVR VLAN
(see "Configuring MVR6 Domain Settings" on page 662).
2. Create an MVR6 profile by specifying the multicast groups that will
stream traffic to attached hosts, and assign the profile to an MVR6
domain (see "Configuring MVR6 Group Address Profiles" on
page 663).
3. Set the interfaces that will join the MVR as source ports or receiver
ports (see "Configuring MVR6 Interface Status" on page 666).
To Next Page
Loading...
Need help?
General
