C
HAPTER
18
| Using the Command Line Interface
CLI Command Groups
– 689 –
CLI COMMAND GROUPS
The system commands can be broken down into the functional groups
shown below
.
Table 44: Command Group Index
Command Group Description Page
General Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI
691
System Management Display and setting of system information, basic modes
of operation, maximum frame size, file management,
console port and telnet settings, system logs, SMTP
alerts, the system clock, and switch clustering
699
Simple Network
Management Protocol
Activates authentication failure traps; configures
community access strings, and trap receivers
773
Remote Monitoring Supports statistics, history, alarm and event groups 795
Flow sampling Used with a remote sFlow Collector to provide an
accurate, detailed and real-time overview of the types
and levels of traffic present on the network
803
User Authentication Configures user names and passwords, command
privilege levels, logon access using local or remote
authentication, management access through the web
server, Telnet server and Secure Shell; as well as port
security, IEEE 802.1X port access control, restricted
access based on specified IP addresses, and PPPoE
Intermediate Agent
809
General Security
Measures
Segregates traffic for clients attached to common data
ports; and prevents unauthorized access by configuring
valid static or dynamic addresses, web authentication,
MAC address authentication, filtering DHCP requests and
replies, and discarding invalid ARP responses
873
Access Control List Provides filtering for IPv4 frames (based on address,
protocol, TCP/UDP port number or TCP control code),
IPv6 frames (based on address, DSCP traffic class, or
next header), or non-IP frames (based on MAC address
or Ethernet type)
951
Interface Configures the connection parameters for all Ethernet
ports, aggregated links, and VLANs
975
Link Aggregation Statically groups multiple ports into a single logical trunk;
configures Link Aggregation Control Protocol for port
trunks
1003
Mirror Port Mirrors data to another port for analysis without affecting
the data passing through or the performance of the
monitored port
1017
Congestion Control Sets the input/output rate limits, traffic storm thresholds,
and thresholds for broadcast and multicast storms which
can be used to trigger configured rate limits or to shut
down a port.
1027
Loopback Detection Detects general loopback conditions caused by hardware
problems or faulty protocol settings
1047
UniDirectional Link
Detection
Detect and disables unidirectional links 1053
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time
1059
Spanning Tree Configures Spanning Tree settings for the switch 1065
To Next Page
Loading...
Need help?
General
