Edge-Core ES3528MV2 - Show Mac Access-Group

C HAPTER 26 | Access Control Lists
MAC ACLs
– 969 –
COMMAND MODE
Interface Configuration (Ethernet)
COMMAND USAGE
If an ACL is already bound to a port and you bind a different ACL to it, the
switch will replace the old binding with the new one.
EXAMPLE
Console(config)#interface ethernet 1/2
Console(config-if)#mac access-group jerry in
Console(config-if)#
RELATED COMMANDS
show mac access-list (969)
Time Range (762)
show mac
access-group
This command shows the ports assigned to MAC ACLs.
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show mac access-group
Interface ethernet 1/5
MAC access-list M5 in
Console#
RELATED COMMANDS
mac access-group (968)
show mac
access-list
This command displays the rules for configured MAC ACLs.
SYNTAX
show mac access-list [acl-name]
acl-name – Name of the ACL. (Maximum length: 16 characters)
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show mac access-list
MAC access-list jerry:
permit any 00-e0-29-94-34-de ethertype 0800
Console#