Edge-Core ES3528MV2 - Show Ip Igmp Query-Drop

C HAPTER 39 | Multicast Filtering Commands
IGMP Filtering and Throttling
– 1237 –
Deny
Range 239.1.1.1 239.1.1.1
Range 239.2.3.1 239.2.3.100
Console#
show ip igmp
query-drop
This command shows if the specified interface is configured to drop IGMP
query packets.
SYNTAX
show ip igmp throttle interface [interface]
interface
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-12)
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
COMMAND USAGE
Using this command without specifying an interface displays all interfaces.
EXAMPLE
Console#show ip igmp query-drop interface ethernet 1/1
Ethernet 1/1: Enabled
Console#
show ip igmp
throttle interface
This command displays the interface settings for IGMP throttling.
SYNTAX
show ip igmp throttle interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-12)
DEFAULT SETTING
None