C
HAPTER
39
| Multicast Filtering Commands
MVR for IPv4
– 1273 –
show mvr members This command shows information about the current number of entries in
the forwarding database, detailed information about a specific multicast
address, the IP address of the hosts subscribing to all active multicast
groups, or the multicast groups associated with each port.
SYNTAX
show mvr [domain domain-id] members [ip-address |
host-ip-address [interface] | sort-by-port [interface]]]
domain-id - An independent multicast domain. (Range: 1-5)
ip-address - IPv4 address for an MVR multicast group.
(Range: 224.0.1.0 - 239.255.255.255)
members - The multicast groups assigned to the MVR VLAN.
host-ip-address - The subscriber IP addresses.
sort-by-port - The multicast groups associated with an interface.
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-12)
DEFAULT SETTING
Displays configuration settings for all domains and all forwarding entries.
COMMAND MODE
Privileged Exec
EXAMPLE
The following shows information about the number of multicast forwarding
entries currently active in domain 1:
Console#show mvr domain 1 members
MVR Domain : 1
MVR Forwarding Entry Count :1
Flag: S - Source port, R - Receiver port.
H - Host counts (number of hosts joined to group on this port).
P - Port counts (number of ports joined to group).
Up time: Group elapsed time (d:h:m:s).
Expire : Group remaining time (m:s).
Group Address VLAN Port Up time Expire Count
--------------- ---- ----------- ----------- ------ --------
234.5.6.7 1 00:00:09:17 2(P)
1 Eth 1/ 1(S)
2 Eth 1/ 2(R)
Console#
To Next Page
Loading...
Need help?
General
