C
HAPTER
13
| Security Measures
IPv6 Source Guard
– 408 –
◆ IPv6 Address – IPv6 address corresponding to the client.
◆ Type – Shows the entry type:
■
DHCP – Dynamic DHCPv6 binding, stateful address.
■
ND – Dynamic Neighbor Discovery binding, stateless address.
■
STA – Static IPv6 Source Guard binding.
WEB INTERFACE
To configure static bindings for IPv6 Source Guard:
1. Click Security, IPv6 Source Guard, Static Configuration.
2. Select Add from the Action list.
3. Enter the required bindings for each port.
4. Click Apply
Figure 225: Configuring Static Bindings for IPv6 Source Guard
To display static bindings for IPv6 Source Guard:
1. Click Security, IPv6 Source Guard, Static Configuration.
2. Select Show from the Action list.
Figure 226: Displaying Static Bindings for IPv6 Source Guard
To Next Page
Loading...
