C
HAPTER
6
| VLAN Configuration
IEEE 802.1Q VLANs
– 205 –
Figure 75: Configuring GVRP for an Interface
To show the dynamic VLAN joined by this switch:
1. Click VLAN, Dynamic.
2. Select Show Dynamic VLAN from the Step list.
3. Select Show VLAN from the Action list.
Figure 76: Showing Dynamic VLANs Registered on the Switch
To show the members of a dynamic VLAN:
1. Click VLAN, Dynamic.
2. Select Show Dynamic VLAN from the Step list.
3. Select Show VLAN Members from the Action list.
Figure 77: Showing the Members of a Dynamic VLAN
To Next Page
Loading...
