C
HAPTER
13
| Security Measures
AAA Authorization and Accounting
– 313 –
Configure Group
◆ Server Type – Select RADIUS or TACACS+ server.
â—† Group Name - Defines a name for the RADIUS or TACACS+ server
group. (Range: 1-64 characters)
â—† Sequence at Priority - Specifies the server and sequence to use for
the group. (Range: 1-5 for RADIUS; 1 for TACACS)
When specifying the priority sequence for a sever, the server index
must already be defined (see "Configuring Local/Remote Logon
Authentication" on page 309).
WEB INTERFACE
To configure the parameters for RADIUS or TACACS+ authentication:
1. Click Security, AAA, Server.
2. Select Configure Server from the Step list.
3. Select RADIUS or TACACS+ server type.
4. Select Global to specify the parameters that apply globally to all
specified servers, or select a specific Server Index to specify the
parameters that apply to a specific server.
5. To set or modify the authentication key, mark the Set Key box, enter
the key, and then confirm it
6. Click Apply.
Figure 155: Configuring Remote Authentication Server (RADIUS)
To Next Page
Loading...
Need help?
General
