C
HAPTER
13
| Security Measures
Configuring User Accounts
– 325 –
â–
Plain Password – Plain text unencrypted password.
â–
Encrypted Password – Encrypted password.
The encrypted password is required for compatibility with legacy
password settings (i.e., plain text or encrypted) when reading the
configuration file during system bootup or when downloading the
configuration file from a TFTP or FTP server. There is no need for
you to manually configure encrypted passwords.
◆ Password – Specifies the user password.
(Range: 0-32 characters, case sensitive)
◆ Confirm Password – Re-type the string entered in the previous field
to ensure no errors were made. The switch will not change the
password if these two fields do not match.
WEB INTERFACE
To configure user accounts:
1. Click Security, User Accounts.
2. Select Add from the Action list.
3. Specify a user name, select the user's access level, then enter a
password if required and confirm it.
4. Click Apply.
Figure 171: Configuring User Accounts
To show user accounts:
1. Click Security, User Accounts.
2. Select Show from the Action list.
To Next Page
Loading...
Need help?
General
