C
HAPTER
14
| Basic Administration Protocols
Simple Network Management Protocol
– 454 –
5. Click Apply
Figure 253: Adding an OID Subtree to an SNMP View
To show the OID branches configured for the SNMP views of the switch’s
MIB database:
1. Click Administration, SNMP.
2. Select Configure View from the Step list.
3. Select Show OID Subtree from the Action list.
4. Select a view name from the list of existing views.
Figure 254: Showing the OID Subtree Configured for SNMP Views
To Next Page
Loading...
