EasyManuals Logo

Edge-Core ES3528MV2 User Manual

Edge-Core ES3528MV2
1480 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #457 background imageLoading...
Page #457 background image
C
HAPTER
14
| Basic Administration Protocols
Simple Network Management Protocol
– 457 –
swIpFilterRejectTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.40 This trap is sent when an incorrect IP address is
rejected by the IP Filter.
swAtcBcastStormAlarmFireTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.70 When broadcast traffic is detected as a storm,
this trap is fired.
swAtcBcastStormAlarmClearTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.71 When a broadcast storm is detected as normal
traffic, this trap is fired.
swAtcBcastStormTcApplyTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.72 When ATC is activated, this trap is fired.
swAtcBcastStormTcReleaseTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.73 When ATC is released, this trap is fired.
swAtcMcastStormAlarmFireTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.74 When multicast traffic is detected as the storm,
this trap is fired.
swAtcMcastStormAlarmClearTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.75 When multicast storm is detected as normal
traffic, this trap is fired.
swAtcMcastStormTcApplyTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.76 When ATC is activated, this trap is fired.
swAtcMcastStormTcReleaseTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.77 When ATC is released, this trap is fired.
stpBpduGuardPortShutdownTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.91 This trap will be sent when an interface is shut
down because of BPDU guard.
swLoopbackDetectionTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.95 This trap is sent when loopback BPDUs have been
detected.
networkAccessPortLinkDetectionTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.96 This trap is sent when a
networkAccessPortLinkDetection event is
triggered.
dot1agCfmMepUpTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.97 This trap is sent when a new remote MEP is
discovered.
dot1agCfmMepDownTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.98 This trap is sent when port status or interface
status TLV received from remote MEP indicates it
is not up.
dot1agCfmConfigFailTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.99 This trap is sent when a MEP receives a CCM with
MPID which already exists on the same MA in this
switch.
dot1agCfmLoopFindTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.100 This trap is sent when a MEP receives its own
CCMs.
dot1agCfmMepUnknownTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.101 This trap is sent when a CCM is received from an
unexpected MEP.
dot1agCfmMepMissingTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.102 This trap is sent when the cross-check enable
timer expires and no CCMs were received from an
expected (configured) MEP.
dot1agCfmMaUpTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.103 This trap is sent when all expected remote MEPs
are up.
autoUpgradeTrap 1.3.6.1.4.1.259.10.1.22.2.1.0.104 This trap is sent when auto upgrade is executed.
swCpuUtiRisingNotification 1.3.6.1.4.1.259.10.1.22.2.1.0.107 This notification indicates that the CPU utilization
has risen from cpuUtiFallingThreshold to
cpuUtiRisingThreshold.
swCpuUtiFallingNotification 1.3.6.1.4.1.259.10.1.22.2.1.0.108 This notification indicates that the CPU utilization
has fallen from cpuUtiRisingThreshold to
cpuUtiFallingThreshold.
swMemoryUtiRisingThreshold
Notification
1.3.6.1.4.1.259.10.1.22.2.1.0.109 This notification indicates that the memory
utilization has risen from
memoryUtiFallingThreshold to
memoryUtiRisingThreshold.
Table 31: Supported Notification Messages (Continued)
Model Level Group

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Edge-Core ES3528MV2 and is the answer not in the manual?

Edge-Core ES3528MV2 Specifications

General IconGeneral
BrandEdge-Core
ModelES3528MV2
CategoryNetwork Router
LanguageEnglish

Related product manuals