Edge-Core ES3528MV2 User Manual

C HAPTER 14 | Basic Administration Protocols
Simple Network Management Protocol
– 469 –
WEB INTERFACE
To configure trap managers:
1. Click Administration, SNMP.
2. Select Configure Trap from the Step list.
3. Select Add from the Action list.
4. Fill in the required parameters based on the selected SNMP version.
5. Click Apply
Figure 263: Configuring Trap Managers (SNMPv1)
Figure 264: Configuring Trap Managers (SNMPv2c)

Edge-Core ES3528MV2 Specifications

General

Brand	Edge-Core
Model	ES3528MV2
Category	Network Router
Language	English