C
HAPTER
16
| IP Services
Domain Name Service
– 591 –
through the domain list, appending each domain name in the list to the
host name, and checking with the specified name servers for a match
(see "Configuring a List of Name Servers" on page 592).
PARAMETERS
These parameters are displayed:
Domain Name – Name of the host. Do not include the initial dot that
separates the host name from the domain name. (Range: 1-68 characters)
WEB INTERFACE
To create a list domain names:
1. Click IP Service, DNS.
2. Select Add Domain Name from the Action list.
3. Enter one domain name at a time.
4. Click Apply.
Figure 344: Configuring a List of Domain Names for DNS
To show the list domain names:
1. Click IP Service, DNS.
2. Select Show Domain Names from the Action list.
Figure 345: Showing the List of Domain Names for DNS
To Next Page
Loading...
