IDEC SmartAXIS Touch FT1A Series User Manual

1 Communicating with the Touch
23-6 SmartAXIS Touch User's Manual
■ Port
Select the communication port on the computer from the following items.
■ Time Out (min)
Specify the time to wait for a response from the Touch (1 minute to 20 minutes).
This option can only be configured when Ethernet is selected for Port.
External Memory: Read or write data to the external memory inserted in the Touch connected to the computer.
For details, refer to Chapter 26 “1.4 Reading/Writing Data” on page 26-3.
USB: Connect the USB port on the computer to the USB interface on the Touch.
Ethernet: Connect the Ethernet port on the computer to the Ethernet interface on the Touch.
The initial values of the network settings on the Touch are as follows.
IP Address: 192.168.0.1
Subnet Mask: 255.255.255.0

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English