IDEC SmartAXIS Touch FT1A Series User Manual

1 Communicating with the Touch
23-10 SmartAXIS Touch User's Manual
● IP Address Manager
You can register target Ethernet settings for performing online function via Ethernet communication to the project
data.
■ IP Address List
Ethernet settings registered in the project data are displayed in this list.
■ IP Address
Enter the IP address to register in the project data.
■ Subnet Mask
Enter the subnet mask to register in the project data.
■ Default Gateway
Enter the default gateway to register in the project data.
■ Comment
Enter comment to register in the project data.
■ Add New
Adds IP Address, Subnet Mask, Default Gateway, and Comment to the list.
■ Delete
Deletes the selected
IP address from the list.
■ Select
Closes IP Address Manager, and apply the Ethernet settings selected from the list.
IP Address: Shows the IP address.
Subnet Mask: Shows the subnet mask.
Default Gateway: Shows the default gateway.
Comment: Shows comment.

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English