IDEC SmartAXIS Touch FT1A Series User Manual

SmartAXIS Touch User's Manual 26-9
1 USB Flash Drives
26
External Memory Devices
6 Click OK.
7 Click Close on the Download dialog box.
Uploading
This procedure shows how to upload the project data from the External Memory Folder on the USB flash drive
inserted in the computer, to the computer.
1 On the Home tab, in the Project group, click Upload.
The Select External Memory Folder dialog box appears.
2 Select the external memory drive, and then click OK.
The Upload dialog box appears.
■ External Memory Folder
Displays the folder specified in the Project tree described next.
■ Project
Specify the destination folder for uploading the project data.
■ Drive
Specify the drive assigned as the external memory drive.
■ Network
The Network Drive Assignment dialog box appears. This dialog box allows you to specify a drive on the network.

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English